A bonnet fit for a Queen

6 days to go and I think, fingers crossed, that Victoria's wardrobe is more or less finished.There are one or two little finishing jobs to see to, but all of the main garments are now complete.

The last item to be finished was a bonnet for wearing to day time events.

Bonnets were an essential part of 19th century women's dress. They dominated millinery fashions throughout the first half of the century and were often regarded as emblematic of the ideals of Victorian womanhood: respectability, virtue, delicacy, authenticity and domesticity.* A woman could not leave the house with her head uncovered and bonnets were the most fashionable and most conventional choice of headwear.

Although the Queen would have worn a crown or tiara for state occasions and evening events, during the day she too wore bonnets. Unfortunately, there are very few early portraits of the Queen in everyday dress as most paintings depicted her in her robes of state, her wedding dress, or regalia. However, this 1856 portrait by Charles Lucien-Louis Muller depicts the Queen in a simple red day gown and white bonnet with ostrich feathers.

Queen Victoria, 1856, Charles Lucien Louis Muller (image found here)

There are also a number of the Queen's bonnets in the Royal Collections at the Museum of London, including a straw bonnet decorated with deep red ribbons.

"These are the only known examples of Queen Victoria's bonnets from before 1861" -  Bonnets, 1845-1855 , Museum of London (Mol.66.79/16,17,18)

Taking inspiration from the colour combinations in the portrait and extant bonnets, I chose a deep red silk twill that complements the red and gold silk gown for my bonnet with white lace and ostrich feather trimmings. The bonnet has the typical form of 1840s bonnets: a close fitting round brim framing the face and an almost horizontal line from the round crown to the brim, tied close under the chin. In the early 1840s, the brim extended forwards, hiding the wearer's profile, but towards the decade began to slip back to reveal more of the the hair and cheek.

The interior of the bonnet is trimmed with a lace ruffle that nestles around the face when worn. This will complete Victoria's outfits for daytime wear when out and about in town.

* References
Joanne Sullivan, "Bonnet Ribbons: A study of the use and representation of silk ribbons as ties on fashionable bonnets, 1830-1899", (Masters Dissertation, University of Glasgow, 2015)
Joan Nunn, Fashion in Costume 1200-1980, (London: The Herbert Press, 1984), 124.
Susan Hiner, Accessories to Modernity: Fashion and the Feminine in Nineteenth-Century France, (Philadelphia and Oxford: University of Pennsylvania Press, 2010), 3.

Bodice Construction - Part I

39 days to go...

Work is progressing well on the silk dress and I thought I would share some of the stages of the bodice construction.

Preparing to cut the fabric

Firstly, I cut all of the dress pieces from both the silk and the lining. It took some time to carefully position the pieces to ensure that the stripes matched where I wanted them to. The darts and curved seams of Victorian patterns make it impossible to match all of the seams but I chose to make sure that the front matched on the diagonal to create a chevron on the centre seam.

Some quick research into original dresses showed this way of using striped fabric to create visual interest was used in the 1840s. Both of these dresses from The Manchester Gallery of Costume feature striped fabrics that have been cut to create a distinctive chevron pattern on the front of the bodice. You can click on the pictures below to find out more about each dress.

 1840s Day Dress, Manchester Gallery of Costume

Tartan Wedding Dress, 1849, Manchester Gallery of Costume

Once all of my pieces had been cut out, I matched all of the silk pieces with the cotton lining. The bodice is flat-lined which means that each lining piece is pinned to the back of its corresponding silk panel. These are then treated and stitched as one piece of fabric. To make them easier to handle you can edge stitch around the pieces to prevent the fabric from moving. However, I chose not to do this as I did not want visible machine stitching even on the inside of the dress. To make the dress more authentic I am hand-stitching the majority of the bodice, including hand-finishing the seams.

Matching silk and lining pieces cut out

Positioning and pinning the lining to the silk

I stitched the front pieces first as there is no piping on the front seams. First of all using the pattern and a tape measure I marked the seam lines for darts (the triangular slits at the front) on the lining side of the fabric. Closing these darts gives the bodice a three-dimensional shape which is slimmer at the waist and shaped to accommodate the bust.

Marking the seam lines for the darts

The darts stitched closed

 Before stitching the rest of the bodice, I then applied piping to the side and back seams. The piping cord is positioned on the outside of the seam line. When the pieces are stitched together, the piping sits on the outside of the seam.

Piping applied to the side back panel

I also turned in and slip-stiched down the facings at the centre back where the bodice will open and close.

Centre back facing slip-stitched to the lining

It was then time to attach all of the pieces together, paying careful attention to matching the stripes at the front and sewing as closely and neatly as possible next to the piping.

The inside of the bodice

The seams are carefully ironed on both sides to press them flat. Curved seams are clipped at intervals to allow them to lie flat. This can be done with a simple snip finishing just before the stitching but I chose to cut out small shaped triangles as this is the technique that I have seen used on curved seams in many original garments. It also creates an attractive seam finish on the inside. All of the raw edges where whip-stitched to finish the edges. This involves taking quick single stitches at a slight angle that loop around the raw edge and help to prevent the fabric from fraying.

Piping on the bottom edge

Finally, the top and bottom edges were finished with piping. On the top edge, the seam allowance of the piping was turned to the inside, folded over and stitched to the lining. However, on the bottom, I have left about 2/8" of fabric below the piping where I will attach the skirt.

In my next post I will share how I have created convertible sleeves which can be worn either long or short to make this dress suitable to wear in the day and in the evening.

The first stitches

68 days to go...

So far in this project there has been a lot of research, planning, and sourcing materials but as yet not much sewing. Until today...

These are the bust gores (triangular inserts that create the curved shape around the breast) for one side of the corset. Inspired by the embroidered corsets featured in the last post the gores have been embroidered with a design executed in chain stitch.

The scrolling motif was borrowed from a later 1880s corset (pictured below) which is owned by the Metropolitan Museum of Art in New York. Museum collections like this one are a brilliant place to start when you are researching a costume or seeking creative inspiration - try the "Search Collections" tool on museum websites to find beautiful, high-quality images and information about all kinds of dress and textiles. Museums with excellent textile collections which are easily accessible online include The Victoria and Albert Museum, The Metropolitan Museum of Art and The Museum of Fine Arts, Boston.

MET_CI48.48_F_1880s embroidered orange corset